Security: Video

This article explains step-by-step how to add and keep the purchased licenses in my Remote Portal account. Upon purchasing licensing, an email from Bosch provides the needed codes.

Bosch Remote Portal provides the VideoView+ Service which allows to display live video, replay of recorded video on the camera, and a forensic search on Video Security Client. Further the Video Security App (on iOS and Android) can receive push alarm notifications triggered by motion in the camera image, for example. This article explains how to configure this service to receive push alarm notifications.

Let's see how can you generate the sensor report of you Fire Panel from Bosch Remote Portal!

This article provides steps regarding how to create an user and connect the Bosch Site Monitor App to Alarm Management.

The live view of the camera is loading indefinitely in Alarm Management Operator Interface > Live View and Investigation Mode and has no streaming video at all.

If the CPP6, 7 and 7.3 cameras no longer have a live image or there is a delay in the image, and the Internet connection has been tested and is within normal parameters, it would be good to check if the cameras have the latest current firmware version 7.86.0020. This firmware version solves a 100% CPU load issue for CPP6, 7, 7.3 from firmware 7.82 to 7.86.19

This behavior was fixed with the version 2.0.6 of Alarm Management Diagnosis module. In case the "Service Usage (Latest)" > "Service Usage Details" does not provide results, the browser cache needs to be cleared or a private browser window needs to be used.

This article provides an answer regarding what to do in case if a  colleague from the same company claimed a license with a wrong Remote Portal account.

This article shows from where can I find my Bosch Remote Portal ID.

Alarm Management has a split user management. The users are created in Alarm Management related to what they are allowed to access in the system.

Cloud VMS provides an AI Snapshot in the Operator Interface > Verification Mode, next to the Alarm Snapshot from the camera and the Smart Event Image.

Once installed and licensed, an application can also be uninstalled from the camera. In this case, the license is being returned to the license pool. It can then be installed on another device. Please note: no return option is possible for the *complete offline use case.

This FAQ article contains a lot of questions and answers related to Bosch Remote System Management service 

Have a look in the Knowledge Base and find out the steps to remove a camera from the CBS account!

This article explains step by step how to export an Alarm Clip and Cloud Recording from Alarm Management to the local PC.

Find out from this article where you can find the sample audio files for the cameras added in the Alarm Management for the "Play audio on device" Action.

Find out from this article how you can get customized audio files to be used in the "play audio" action from Bosch Alarm Management

AI Alarm Verification is applicable to Bosch Remote Portal cameras and 3rd party cameras**, for sites in Alarm Management which support alarm clip upload. 

This article contains possible causes and solutions regarding  the recording error (stream 1) on the Remote Portal when camera records on its SD card on alarms only.

Check this article and see how to solve if the cameras in Alarm Management cannot use services activated in Remote Portal.