Security: Video

Starting on September 30th 2021, Dropbox™ has changed to short-lived access tokens, which expire after four hours. 

To change the camera name in Remote Portal, you need to change the camera's Device name and then re-register the camera to Remote Portal.

After configuring the Virtual mask in the web browser of Bosch CPP7.3 camera and afterwards going back to the Live view, the Virtual mask appears as Privacy mask and is not transparent and other inappropriate behaviors have been noticed. This happens on the Bosch CPP7.3 cameras that have FW version older than v.7.86.0019

This article presents what parameters to set in BVMS on a new Stream Quality profile.

The purpose of this article is to help you disabling the compass character from the Screen Display (OSD) of the Bosch PTZ camera via its web interface

Remote Portal's Remote Connect service allows connection to your devices through the Remote Portal with your client software, such as Video Security Client and Video Security App.

This article is meant to provide you with the step-by-step guide to activating the wiper and the white lights illuminator option, if your camera is equipped with both of them.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.

Find out from this article if it is a cause for concern if the temperature of FLEXIDOME IP 5000i IR (NDI-5503-AL) is higher than other cameras.

All Bosch IP cameras that are equipped with a Micro SD can record at the edge. While video recorded via Bosch’s proprietary iSCSI format is none readable, many sites require any type of recorded video to be encrypted.

WD MSD-064G IP SECURITY MICROSD CARD does not support lifespan check for Bosch CPP4 cameras

To get a snapshot image from your camera, you can use the following URL: HTTP://camera_IP_address/snap.jpg

This articol answer answer to the question:  Is the 'Day-to-night switch over' option missing in some Bosch cameras?

This article explain step by step how to upgrade the firmware for multiple cameras (bulk) at the same time in Configuration Manager.

This article explains how to switch a Bosch camera managed by a VRM to record to the SD card without factory defaults.

Follow this step-by-step guide and learn how you can ground the parapet mount for Bosch IP cameras & POE Midspan

This article gives you the solution to fix the behavior when the recording doesn't work for VG4 AutoDome camera and when the Bosch logo is displayed in the cameo

This article explains how you can change the IP address of a Bosch camera from its WEB GUI or by using Configuration Manager.

Check this article and find out what the Start Manual Recording button of VRM Camera Cameo does in BVMS Operator Client