This article contains possible causes and solutions regarding the recording error (stream 1) on the Remote Portal when camera records on its SD card on alarms only.
All Bosch IP cameras that are equipped with a Micro SD can record at the edge. While video recorded via Bosch’s proprietary iSCSI format is none readable, many sites require any type of recorded video to be encrypted.
Have a look at this article and learn what you should check when your cameras do not record and when going to VSG and recording, it stands that 'ANR not configured' or 'No more blocks available'
This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager
*Firmware 9.10 must be installed prior to installation of this firmware 9.51.
Firmware download location: Download Store or on the product page > Downloads: VIDEOJET decoder 8000 page
This article aims to define the way you can display camera video via decoders. Moreover, fifteen different settings scenarios and their effects will be outlined for the live video to be displayed through the decoder.
