Security: Video

When using ANR function in combination with 'alarm only' recording , recording 1 is with only the motion recorded.

This article explains how to playback the SD card recordings in Operator Client from a camera added as Local Storage in BVMS Lite 10.1

Follow the steps from this article and find out how you can license BVMS Viewer v.11.0  or above for free.

If you are still using BVMS version <9.0 and you want to replace a faulty device without loosing recording, please follow the steps below.

Note that this procedure applies only from VRM version 3.10 onwards.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

This article explains how to install Video Security app from the Site Monitor app, if not installed so far.

The USB driver has a different letter than E:\ and DIVAR IP Software Center seems to look only in this root, in fact it doesn't find the new software.

This article contains a step-by-step guide from which you can learn how to change the video stream of a camera in Bosch Video Security Client

This article illustrates how to avoid timeouts in the "jump to next"/"jump to previous" functionality for recordings in Bosch VMS Operator Client..

This article describes how to deploy Microsoft Security Updates on a BRS Appliance

The "Import" icon may be missing from table view in Configuration Manager, version <7.50. Therefore, we recommend to update the Configuration Manager to v7.50

This behavior was improved with the release of Video Security Client/App 3.2.3.

Is DIVAR IP 6000 R1 compatible with VRM v.3.83.0021 (64-bit) and BVMS Viewer 10.1?

This article explains how you can change the relay mode back to automatic via a script executed when the relay open event is triggered.

According to the BVMS 11. Release notes > 2.2. Removed functionality chapter > The digital monitor wall functionality has been removed. This removal has impact on the BVMS Viewer → Decoders are not supported anymore in BVMS Viewer starting with version 11.0 Other devices and functions that have been removed to ensure software security: Map migration (removed Autodesk design review installation) SMS gateway Dibos/ BRS Note: The Monitor Group functionality is still available in BVMS Professional/ Plus/ Lite.

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

BVMS v11.0 offers a map-based tracking assistant and improved geographical awareness with online maps. Read on to learn how to configure the map-based tracking assistant.

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

Follow this article and find out what to do if the Bosch VRM Monitor page does not open correctly, but instead displays an Error and the video is always Black.