Security: Video

Here we describe the steps that would be need to be done to successfully move VRM to a new server.

The present document is intended to provide information on the VRM camera replacement functionality in the Bosch Video Management System (BVMS), as well as guidance through the process

This article explains how to playback the SD card recordings in Operator Client from a camera added as Local Storage in BVMS Lite 10.1

The article describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.

This article explains how to configure Monitor B output for Divar AN 3000-5000.

This technical note summarized the different integration possibilities available today and the clients supplied by Bosch.

The article describes how to receive analytic events from Bosch cameras in Milestone XProtect.

This article describes how to secure the data connection between Bosch cameras and Milestone's XProtect by the use of 'Authority-signed Certificates' 

This article describes how to use Milestone's PTZ  "Home" position with Bosch PTZ cameras.

Note that this procedure applies only from VRM version 3.10 onwards.

This articls provides the steps to update a DIVAR IP system. The firmware version 3.180.05-1562 can be used with the LSI MegaRAID Controller. 

Remote Connect service allows the Customer users to display cameras on Remote Portal Viewer on Video Security App and Video Security Client.

The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.

To be able to deploy a camera with DHCP disabled to Bosch Remote Portal, please perform the steps from this article.

The Administrator can create groups and even nested groups to organize devices in Remote Portal

Bosch has implemented the ONVIF Profile M with MQTT support in its cameras (CPP6, CPP7 and CPP7.3) in the firmware 7.81.0060 and above.

This is the old way as for Project Assistant versions < 1.3.

This article provides an overview of object classification, describes how to configure it and what the limitations are.

This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.

This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.