Dinion IP starlight 6000 HD/ Dinion IP ultra 9000 MP is a fixed camera, not a PTZ camera. The camera is only capable of e-PTZ (Electronic Pan, Tilt and Zoom).
The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on.
Here we will introduce 3 ways to find the network camera IP address quickly and easily.
This article contains the lists of cameras that support Camera Trainer, what Camera Trainer is, how it works, what to use it for and what not, and how to configure it.
This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.
If you have configured an out of the box system and once the configuration was done you wasn’t able to access the BVRAdmin account, this article will help you to find a solution.
Access to BVRAdmin account is required to perform administrative tasks on the operating system.
This requires the following steps:
This article describes the easiest method for adding Expansion shelves to a Base unit DSA E-Series E2600, E2700 or E2800.
This article also applies when:
The amount of storage is overloaded and you need additional storage after fully populating the base shelf.
Article requirements:
1. Configuration Manager
2. Configuration Client which is included with BVMS
3. Santricity Software
Step-by-step guide
