Security: Video

Check this article and find out how you can avoid displaying black image in Operator Client BVMS v11.0

When logging into BVMS Operator Client, there is an alarm showing up: “System Error - Server alarm queue capacity reached”. Find out from this article what could be the cause and how to solve this.

This article presents what should be checked when the Sever State is Disconnected in Logical Tree from BVMS Operator Client.

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

White cameo in BVMS Operator Client or "device failed" message may be caused by the NVIDIA graphic card driver that might not be compatible.

The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.

BVMS Configuration Client or Operator Client does not display correctly on the DIVAR IP 4000 AIO when opened from the Kiosk mode and appears oversized in fullscreen.

Log4j 1.2.17 is not actively used or called by the SQL Server or by the BVMS. This means that the vulnerabilities are not exploitable unless you install some additional components that refer to the vulnerable component. Therefore, there is no risk of exploitation within the SQL Server or BVMS environment.

Regular BVMS 12.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Usually, we recommend to upgrade BVMS in steps. Each version should not be more than ~two years apart. This prevents potential issues in the upgrade process.

“Error: Discontinuity in network stream!” appears randomly on the monitor/s connected to the VIDEOJET Decoder 7000 (7513). What could be the likely cause of this?

This article explains how to enable or disable audio recording for specific camera in BVMS, on action of BVMS Operator Client user.   Follow the step-by-step guide from this article.

Starting with BVMS v10.0, you can leverage VRM Encryption Technology.

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

Find out from this article what you should check when there is a black image of your camera in Operator Client when clicking on the Instant Playback

By setting a low Frame rate and a long GOP, this affects the replay.  On the flip side high frame rate and short GOP can show pulsing Live video: 30 FPS @ GOP 10 = 3 I-Frames per sec (the video could appear pulsing; the Monitor refresh rate could also play a role here)

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.

You can create a Command Script using the following scripting languages: C# and VB.Net You cannot change the scripting language of an existing Command Script. You can create a Client Script or a Server Script. You can add multiple scriptlets to every script.

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

If you would like to exclude certain Events and Alarms from being written in the BVMS logbook you do have the option to exclude such information.