According to the BVMS 11. Release notes > 2.2. Removed functionality chapter > The digital monitor wall functionality has been removed.
This removal has impact on the BVMS Viewer → Decoders are not supported anymore in BVMS Viewer starting with version 11.0
Other devices and functions that have been removed to ensure software security:
Map migration (removed Autodesk design review installation)
SMS gateway
Dibos/ BRS
Note: The Monitor Group functionality is still available in BVMS Professional/ Plus/ Lite.
During the BVMS upgrade from v11.1.1 to v12.0 through System Manager v2.0 on the DIVAR IP 6000 AIO, the software file placed on an external drive is not visible to be installed. What could be the cause?
There might be problems when you are trying to use the Forensic search function for FLEXIDOME Multi 7000i cameras (FW 8.71.0066) after upgrading from BVMS 10.1 to BVMS 11.1.1.65.
The message is saying that “Forensic search must be configured for this workstation”
This article explains what you can do when the ‘Stream limits’ parameter set in the webpage of FLEXIDOME multi 7000i camera is not visible in BVMS Configuration Client.
By design, the Dual-Recording feature is specific only in Bosch Cameras. 3rd party cameras are integrated into Bosch Systems like BVMS-VRM via our Video Streaming Gateway (VSG)
Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?
System Overview:
BVMS 11
1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group
The monitor has a layout consisting of several image panes
Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor
Follow these instructions from this article if the ‘error code=1’ appears in Configuration Client - License Manager during the license activation process.
This article contains a step-by-step guide which explains how you can do the setup for the camera's live view image pane to be displayed in full screen in the Operator Client if a motion alarm is triggered on that camera,
License expansions missing after upgrade to BVMS 11 in Remote Portal. Only 1 x MBV-XCHANPLU license activated instead of 16 x MBV-XCHANPLU. What to do?
The MG Camera Name and Number Setting (BVMS Configuration Client, under MG Camera Settings) was not designed for BVMS Operator Client cameo, but in fact for the CPP-Enc type of decoder like VJD-3000.
The alarms appear, the forensic search is working fine, but the yellow lines don’t appear on the recording line/ timeline. What to do to display the yellow lines in timeline?
This article provides solution regarding 3rd party camera which is added in VSG and is not displayed in the Device Tree from BVMS Configuration Client.
Maintaining the highest level of data security requires continuous improvements in all the system components - including software and device firmware. Recent changes in the camera firmware are focused on improving the security level overall.