Security: Video

In this article is explained step by step how to collect System Manager logs from your DIVAR IP all-in-one 4000 & 6000.

At startup, a black screen is showing up and it is impossible to boot into the BIOS or attempt a reset by pressing the F7 key. How to fix this?

This article presents what are the limitations of Privacy overlay in BVMS 12 (Pano cameras, h.263 & MPEG, decoder, VSC).

This article explains what is the difference between operations mode of a DIVAR IP all-in-one 4000 & 6000.

If for any reason, later on the DIVAR IP needs to be removed from Bosch Remote Portal connected via System Manager, follow the steps from this article.

The minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time, the more storage space is required. In this article we are going to show you how to add DIVAR IP 5000 EZ in My devices (Configuration Manager) and configure max & min retention time.

Question   Why the Windows license key and System ID are the same on all my DIVAR IP 6000?   Answer   These units come pre-licensed from the factory and they have an OEM (Original Equipment Manufacturer) license activated. Please see more information about OEM on the Wikipedia link below:  https://en.wikipedia.org/wiki/Original_equipment_manufacturer According to its datasheet, all components relevant to the usage of DIVAR IP 6000 as storage array in a Bosch recording solution are pre-installed and preconfigured. Simply connect to the network and power the unit up — DIVAR IP 6000 is ready to begin recording straight out-of-the-box.

Importing a foreign configuration should recover a RAID configuration (in case the RAID is not corrupt) This option must be performed before creating a new VHD. This option may restore all of the video and data on the drives.

The Windows Storage Server operating system of DIVAR IP all-in-one 7000 is installed on a two SSD drives in redundant (mirrored) configuration. Health status of the mirrored OS drives can be monitored using a tool called Virtual RAID on CPU (formerly known as Rapid Storage Technology). Installation and configuration steps are described below. Step-by-step guide   1. Installation: Download the setup from here Copy the content to a USB drive When the BVMS default screen is shown, press CTRL + ALT + DEL Hold down the SHIFT key while clicking Log off Log in as BVRAdmin Transfer the IATA_CD.exe from the USB drive to the BVRAdmin desktop Double click the IATA_CD.exe executable Follow the installation procedure as shown in the screen shots     2. Email notification: Note: The E-mail notification feature is based on SMTP access without authentication. It is strongly suggested to use this functionality only with a dedicated server in the local network, which is specifically configured for this purpose and doesn’t handle any critical data.

During the BVMS upgrade from v11.1.1 to v12.0 through System Manager v2.0 on the DIVAR IP 6000 AIO, the software file placed on an external drive is not visible to be installed. What could be the cause?

In this article can be found which is the max. iSCSI recording sessions of DIVAR IP AIOs.

This article explains that by pressing ALT+TAB  it is possible to return on the kiosk mode from DIVAR IP System Manager without the need of restarting the unit.  

This article shows the blueprints for the three operation modes that the DIVAR IP supports, combined with Remote System Management. They show the capabilities and limitations of Remote System Management in each of the modes.

This article provides an answer if can the Operating System of a DIVAR IP Series be upgraded.

DIP serial number can be found in 2 ways. IPMI information cannot be found within the software and is provided on the device itself. It can be found next to the BMC/IPMI port on the back of the device.

In this article you will find out where you can find the POST snooping code of your DIVAR IP R2

Find out from this article what can you do if the Windows product key cannot be activated on your DIVAR IP and if this message was displayed: "This key didn't work, please check it and try again, or try a different key."

If you were asked by the Central Technical Support team to provide them with the Sensor readings picture during the troubleshooting process of your device, please follow the steps from this article

This article explains what does the color of the led in the front view of the DIVAR IP AIO 5000 indicate.

If you want to reinstall your unit with unconfigured HDDs and the RAID is not created yet, follow the steps from this article.