Security: Video

PTZ camera (Autodome IP starlight) doesn't move in Pan or Tilt direction. This is a basic troubleshooting guide that will help you to fix this issue.

Do not upgrade the camera FW directly to 7.81. Otherwise, “error 13: device check failed” message will be displayed, and the FW will not be upgraded successfully.

This article contains the options for physical/ default reset of Bosch Inteox cameras.

New generation of Bosch cameras: no default password, the user has to create one

The “inactivity” algorithm from this article will move the camera to Pre-position 99 in the Alarm Task scripting.

Check this article and find out how can you fix the bad frozen image and no PTZ, bad images, uncontrollable web-interface, stuck images in Genetec live/recording for AUTODOME IP starlight 7000 HD camera (FW 7.10.0076) integrated in Genetec as VMS. Version 5.9.4

Are you looking for the MIC IP fusion 9000i Wiper/Washer RCP command syntax to incorporate it in the third party software?

See what you can do when MIC 7000i with FW 7.72 shows blurred images. After restart, the quality of the image is good for a short time, but the issue reappear.

For certain conditions, MIC cameras will display status codes on the video image. What does "status 9" mean on the MIC IP ultra 7100i │ MIC IP starlight 7100i camera's web page ?

The sectors 1-4 are displaying only black screens and the message 'Display blanked' in Live view mode on the web page of the camera. Find out from this article how you can fix this!

Find out from here what is VCA (Video content analysis) and how you can stop this setting.

This article explains how to fix the behavior of MIC IP 7000i/9000i Bosch camera when is out of focus during a rapid zoom

This guide is meant to explain how to enable the appropriate debug commands for logging during random reboot situations, and which logging to collect for troubleshooting, as in general there are multiple triggers that can cause a device to reboot. The information gathered will help to analyze the root cause.  Please make sure that all of the logs collected cover the same time period.

This article it is about analog control system connected directly to the MIC IP serial port. The serial com ports of traditional analog systems head end control systems connect directly to the RS485 input of the MIC IP models listed within this article.

This article contains the CGI commands that help you to enable or disable the MIC 7100i/MIC 7000i/MIC fusion 9000i camera's Wiper during boot-up

By checking the Zoom threshold box you will select the current zoom position at which the mask will appear as the camera zooms in or be hidden as the camera zooms out.

Find out in this article the Bosch Inteox cameras portfolio with the New Features

If cleaning the bubble is required, use the following procedures and comply with all the warnings listed in this article.

This article contains several common questions and answers about Firmware of Bosch MIC IP Starlight 7000i cameras

This article provides a solution to the intermittent focus issues for MIC 7000i series and for the Optical video in the MIC 9000i