Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎05-13-2021 03:39 PM
    Related Products: BVMS / MVS / VSDK Overview: On request from development to provide a dump file from MVS system please follow the steps in the solution section.   Step-by-step guide   Reproduce the issue Download the Microsoft debugger procdump (https://technet.microsoft.com/en-us/sysinternals/dd996900.aspx). The procdump tool is also attaced to the article :How To create BVMS memory dump?  When application is crashing, do not click any buttons on the appeared error window that will change the program state. Run the procdump.exe from the directory where you copied the tool with following command line (Start - cmd): procdump.exe –ma <name of the programm exe> <dump file name>.dmp   In the case of MVS you need to do that for all 4 MVS services: - Bosch.MVS.SourceProvider.BVMS.Service.exe - Bosch.MVS.DataStorage.Service.exe - Bosch.MVS.SourceProvider.MobileCamera.Service.exe - Bosch.MVS.Transcoder.Service.exe
    View full article
    100% helpful (1/1)
    ‎05-12-2021 12:28 PM
    Answer Web Browsers: o Google Chrome o Microsoft Internet Explorer 11 or higher o Microsoft Edge (Chromium based) o Mozilla Firefox   Important: When using browsers where Mpeg ActiveX is required → VCA, clock & date and recording dot point may not work. For a complete browser functionality, Mpeg ActiveX 6.34 or newer is needed and it is supported only by   Internet Explorer (IE). This is the only browser that allows the VA configuration option (for e.g.).   If you would like to avoid using IE and you want to   configure VA, it is recommended to   use Configuration Manager. According to the Release Letter, Configuration Manager is used for configuration and licensing of the various products. It includes Video SDK 6.3 and latest plug-ins for   VCA configuration. You can Download it from   here.   If you use Firefox, the issue below might arise. In this situation, IE browser/ CM is recommended to be used in order to access the missing elements. Firefox does not allow ActiveX elements . Therefore, some features are missing inside the webpage. Note: VCA related check boxes is fixed in 7.80 for Microsoft Edge. (7.80.0128 Release Letter)
    View full article
    ‎05-12-2021 10:34 AM
    The Windows Storage Server operating system of DIVAR IP all - in - one 7 000  is  installed on a two SSD drives in redundant (mirrored) configuration. Health status of  the mirrored OS drives can be monitored using a tool called Virtual RAID on CPU  (formerly known as Rapid Storage Technology). Installation and configuration steps  are described below. Step-by-step guide   1. Installation: Download  the setup  from  here Copy the content to a USB drive When the BVMS default screen is shown, press CTRL + ALT + DEL Hold down the SHIFT key while clicking Log off Log in as BVRAdmin Transfer the IATA_CD.exe from the USB drive to the BVRAdmin desktop Double click  the  IATA_CD.exe executable Follow the installation procedure  as shown in the screen shots     2. Email notification: Note: The E-mail notification feature is based on SMTP access without authentication. It is strongly suggested to use this functionality only with a dedicated server in the local network, which is specifically configured for this purpose and doesn’t handle any critical data.
    View full article
    ‎04-29-2021 03:46 PM
    Related Products: Video Analytics for Firmware 6.60 and above Technical Note on Intrusion Detection The technical Note  attached to this article contains detailed technical description of Intrusion Detection, set up guidance for different usage scenarios and best practices. It is useful to get in depth knowledge about Intrusion detection or to find the answer of frequently asked questions.   Intrusion detection without calibration Learn how to use the default scenario - Intrusion detection no camera calibration: A predefined scenario that can be used to detect intruders in small areas and controlled environments Intrusion detection one field   Learn how to use the default scenario - Intrusion detection one field: A predefined scenario that can be used to detect intruders in small areas. Intrusion detection two fields   Learn how to use the default scenario - Intrusion detection two fields: A predefined scenario that can be used to detect intruders in large outdoor areas.  Note: If needed you can get additional how to information on camera calibration.
    View full article
    100% helpful (1/1)
    ‎04-29-2021 02:20 PM
    Related Products: Video Analytics for Firmware 6.60 and above This article covers traffic monitoring of Bosch Video Analytics with How to Videos (one already available and one in planning) Default scenario of wrong way detection Learn how to use the default scenario of wrong way detection: A predefined scenario that can be used to detect an object that is traveling the wrong way.   Default scenario traffic incidents This predefined scenario is designed to detect common traffic incidents on roads: Wrong way – triggers an alarm if object travels in wrong direction Pedestrian – triggers an alarm if pedestrian is on the road Slow vehicle – triggers an alarm if vehicle moves slower then predefined speed. Stopped vehicle – triggers an alarm when vehicle is stopped longer than predefined time span. Dropped object – Triggers and alarm if an object is dropped on the road   This how to video shows in detail how to use the predefined tasks Wrong way, Slow vehicle and Stopped vehicle.   Note: If needed you can get additional how to information on camera calibration.  
    View full article
    100% helpful (1/1)
    ‎04-29-2021 11:09 AM
    This Video should help you to understand, what calibration means, why and when to calibrate the cameras.
    View full article
    100% helpful (1/1)
    ‎04-29-2021 10:40 AM
    Related Products: BVMS SDK, BVMS    Overview: BVMS Scriptlets can be debugged via logging to a logger file or messaging to the Operator workstation. This article describes how to enable BVMS Scriplet logging. You can log to the Server Script log or the Client Script log. Logs are default send to C:\ProgramData\Bosch\VMS\Log   1.Creating Log files ClientScriptLogger – automatically created Creates file “ClientScriptLog.txt” ServerScriptLogger - automatically created  Creates file “ServerScriptLog.txt”   2.Log information to the log files There are 3 methods to log information: Log Info Log Error Log Debug   Examples: [Scriptlet("59c4d66e-9395-4dcc-8d27-90dc2b7a00c4")] public void DemoLogger() { //use refence:C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 MessageBox.Show("Hello World"); Logger.Info("Hello World script started"); Logger.Error("Hello World script started"); Logger.Debug("Hello World script started"); // Not writing to ClientScriptLog.txt ! }   3.Logging Location - C:\ProgramData\Bosch\VMS\Log. The logs are automatically collected by the BVMS Configuration Collection Tool. 4.Changing the location of the BVMS Scriplet Logging.   Server Scripts : Logging Directory can be found in the file: C:\Program Files (x86)\Bosch\VMS\AppData\Server\CentralServer\BvmsLogCfg.xml and is defined by the ServerScriptLogAppender path: Default: </appender> <appender name="ServerScriptLogAppender" type="Bosch.Vms.Shared.Logging.Imp.RollingFileAppender, Bosch.Vms.Shared.Logging.Imp"> <file value="%CommonApplicationData%\\Bosch\\VMS\\Log\\ServerScriptLog.txt"/>   Client Scripts : Logging Directory can be found in the file: C:\Program Files (x86)\Bosch\VMS\AppData\Client\OpClient\ApplicationWiring\Nvr\LogCfg.xml and is defined by the ClientScriptLogAppender path: Default: </appender> <appender name=“ClientScriptLogAppender" type="Bosch.Vms.Shared.Logging.Imp.RollingFileAppender, Bosch.Vms.Shared.Logging.Imp"> <file value="%CommonApplicationData%\\Bosch\\VMS\\Log\\ClientScriptLog.txt"/>
    View full article
    ‎04-29-2021 10:16 AM
      Related Products: VRM, Genetec Security Center Overview: It is possible to use VRM free of charge (no extra VRM license is required) within Genetec Security Center. Genetec is sending encrypted secret to the VRM server with the number of the licensed channels. When VRM receives and validates this, it can be used for that number of channels for 24 h. A periodic license update is send by Genetec, so the VRM licensing is guaranteed as long as it is used with Genetec Security Center. Default settings, if not extra configuration is needed or done. -License for 1000 Cameras - License update is done every hour   How to license more than 1000 cameras or change the license update period for VRM within Genetec Security Center: Open the Config Tool and Launch a Video Task Select the Archiver Go to the Resource Tab and click on Extensions From the Tab Installed extensions select Bosch. In the Tab VRM add a new VRM and/or select already configured VRM. Click on Advanced settings and add the following parameters If you need to license the system with more than the default 1000 licenses – create the parameter with Name VrmLicenseRequestCount and as value put the required number of licenses. The parameter name is case sensitive If you need to change the duration of the period between each license request (there is always one license request when the archiver starts) – create the parameter with Name VrmLicenseRequestPeriod. The duration of the period is in milliseconds. The default value is one hour. If the value is set to 0, the license request are disabled. The parameter name is case sensitive     Press Enter to confirm the entry and then Close Press Apply and then OK. At the webpage of the VRM one can check if the number of licenses is changed.                    
    View full article
    ‎04-29-2021 09:52 AM
    Follow the steps from this article and find out how you can integrate the Bosch USB Keyboard "KBD Universal XF" with Bosch Video Client (BVC).   Driver installation is required on the workstation where the KBD Universal XF Keyboard is connected Driver can be download from the official Bosch Security and Safety Systems page. Navigate to Products > Video System > Switching System and Keyboards > Keyboards >   KBD Universal XF   > Downloads > Software Operational Check When connecting the KBD Universal XF Keyboard to a workstation, the LEDs will blink once. This indicates that the keyboard is detected by the workstation
    View full article
    ‎04-29-2021 09:06 AM
    The   Clear   button on the   Configuration Manager   is designed to clear the codes that are self-generated by the IP firmware or the Configuration Manager itself. Follow the steps below, if you want the "Clear" button from Configuration Manager to able to erase the Alarm task script that are self created by users themselves.   Step-by-step guide   When you create your alarm task script, add it within an opening quotes which then the   Clear   button will be able to erase all those codes within the quotes. Alternatively, create your own quotes within your script by following the below rules. In the  Below example,   //{{MyScript_start   is inserted before any script and   //}}Myscript_end   is inserted at the end of the script. By doing this, the   Clear   button will now be able to recognize and detect the manual scripts created by user and erase them.   Example: //{{Myscript_start ControlCode auxon1:={Operation(AuxOn)Number(1)}; if(Motion(1))then auxon1; //r1_o1 //}}Myscript_end
    View full article
    ‎04-28-2021 03:22 PM
    This article shows how to configure Input Alarm and later search for them in the Event search using Web Interface. There are only 3 different search parameters for Event type search, which are "All", "Motion" and "Alarm". Once can search for any alarms during the set time period and channel and in this way indirectly to filter for Input Alarm (if only Input Alarm triggers Recording for a particular channel). It is not possible to directly narrow the search for particular Alarm type (ex. Input alarm).
    View full article
    100% helpful (1/1)
    ‎04-28-2021 02:25 PM
    Related Products: Configuration Manager 7.00 and above. This article shows how to use recorded video in Configuration Manager in order to calibrate a camera and to configure a task.  
    View full article
    ‎04-27-2021 03:13 PM
    This article provides you the solution when the MIC IP starlight 7100i camera wiper stops on the screen. Furthermore, you will learn how to perform a physical reset of the camera.
    View full article
    ‎04-26-2021 04:30 PM
    Question What is a CPP and where you can find it for you Bosch IP camera?   Answer   To guarantee high quality imaging through the entire range of products, Bosch Security Systems uses a Common Product Platform (CPP). A CPP is a reference design that serves as a solid base for future cameras. Based on the same CPP, sub- or new products can be generated more easily by using a different sensor and/or a different housing. Each product cannot only benefit from the features provided by the platform but can also advance its functionality. Other advantages: easier integration with 3rd party security system components, such as VMS and recording solutions. allows installers and integrators to use the same interface that supports the entire Bosch product portfolio. new camera and software releases, regardless of the price segment, can be easily added to an existing security surveillance system. it helps you to find the right version of firmware you need for your camera   Where you can find the CPP of you Bosch IP camera?   1. Release notes: you can search for it directly on the product page > under Downloads section you will see the CPP version of your camera. In this example, the CPP for FLEXIDOME IP panoramic 5000 MP camera is CPP4:   2.  You can find the CPP of your camera on the web page by entering the IP address of it. Go to Configuration > Service > System Overview   CPP & Firmware: All firmware releases for the various Common Product Platforms (CPP) for Bosch IP cameras and video encoders can be found on the Bosch Security and Safety Systems page in Download Area. For detailed information of a specific product, the product catalogue is the recommended way to go. Those, who just need to update firmware and already know the platform which their product is based on, may directly go to the Download Area for a quicker and condensed overview   Other useful articles related to CPP & Firmware: Where you can find the intermediate firmware version when upgrading CPP4 cameras? What is the maximum firmware version supported by cameras depending on the BVMS version? TB VS: Bosch IP Video increased security with Firmware 6.51 / Firmware downgrade dependencies FAQ VS: How to upgrade from <6.10 to Firmware 6.50 and usage of the "combined firmware file 6.50"
    View full article
    ‎04-14-2021 03:46 PM
    Question   Where and how should unlock codes be used to reset the DIVAR recorder password? This article is applicable for the following DIVAR recorders: Divar XF/700 Divar MR DVR400/600 Divar Analog 3000/5000 Divar Hybrid & Network 2000/3000/5000   Answer When you request to reset the DIVAR password, the Central Technical Support team provides you with the unlock codes.   ⚠️  Kindly note that the unlock codes received from the CTS are valid only for 1 Day. Moreover, please make sure that the date displayed on the Live monitor matches the date you requested the password reset. For more information, please check the following article: What information is required when you request a password reset for your recorder?   In order to fill in one of the provided unlock codes, you will need to connect locally to the DIVAR unit -> Monitor, mouse and keyboard are needed. Use the following: User name: ADMINISTRATOR Password: one of the provided unlock codes
    View full article
    100% helpful (1/1)
    ‎04-14-2021 09:53 AM
    What happens when you upgrade the SW of your Management Server form e.g. BVMS 10.0 to BVMS 10.1 and you have not prepared a BVMS 10.1 activation key beforehand? => The System will be unlicensed and Operator Client will not be able to connect to the MS as long the new BVMS 10.1 activation key is not provided to the system via Config-Client. Therefore,   performing the steps from this article is absolutely necessary.
    View full article
    ‎04-06-2021 08:43 AM
    To ensure the highest customer satisfaction and replace the defective hardware faster and more smoothly, it is necessary to register each system for the specific country together with the system location. But where and why should you register your device?
    View full article
    ‎04-06-2021 08:41 AM
    Question: Let’s suppose that you have one setup which consists in an Adam 6060 I/O module, BVMS 10.1 and a DINION IP thermal 8000 camera. Can the state of an ADAM relay module be changed when the IVA from the camera generates an alarm?
    View full article
    ‎04-05-2021 05:18 PM
    If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.
    View full article
    ‎04-05-2021 05:17 PM
      Did you try to upgrade the firmware of your camera and the message below was displayed? Find out from this article what might be the cause that could lead to this message being displayed: “error 18: wrong or no signature”
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist