Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    ‎05-20-2021 10:47 AM
    Question   Where can you find the ISO image for recovery of DIVAR IP 7000R2 and DIVAR IP 6000R2?   Answer   Related Products: DIVAR IP 7000R2 and DIVAR IP 6000R2   CTN Description   DIP-6180-00N  DIVAR IP 6000 2U W/O HDD  DIP-6183-4HD  DIVAR IP 6000 2U 4X3TB  DIP-6183-8HD  DIVAR IP 6000 2U 8X3TB  DIP-6184-4HD  DIVAR IP 6000 2U 4X4TB  DIP-6184-8HD  DIVAR IP 6000 2U 8X4TB  DIP-61F0-00N  DIVAR IP 6000 3U W/O HDD  DIP-61F3-16HD  DIVAR IP 6000 3U 16X3TB  DIP-61F4-16HD  DIVAR IP 6000 3U 16X4TB  DIP-7180-00N  DIVAR IP 7000 2U W/O HDD (R2)  DIP-7183-4HD  DIVAR IP 7000 2U 4X3TB (R2)  DIP-7183-8HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-4HD  DIVAR IP 7000 2U 8X3TB (R2)  DIP-7184-8HD  DIVAR IP 7000 2U 8X4TB (R2)  DIP-71F0-00N  DIVAR IP 7000 3U W/O HDD (R2)  DIP-71F3-16HD  DIVAR IP 7000 3U 16X3TB (R2)  DIP-6704-HD 4000GB HDD DIVAR IP 6000/7000    For recovery of DIVAR IP 6000 R2 or DIVAR IP 7000 R2 one should use only the DVD provided with the particular device. Do not use the DVD for recovery if you are not sure that it is the one delivered with the system. In case the DVD is lost or damaged request the respective ISO image from Bosch Technical Support.  Solution:  Request the ISO image from Bosch Technical Support:   Provide the Serial Number of the device Issue description: What is the reason for the recovery Why it is not possible to use the recovery DVD   Note: This article will guide you through the recovery steps of a DIP:  TSG: Rebuild broken OS RAiD on DIVAR IP 6000, DIVAR IP 6000 R2, DIVAR IP 7000, DIVAR IP 7000 R2
    View full article
    100% helpful (1/1)
    ‎04-29-2021 11:09 AM
    This Video should help you to understand, what calibration means, why and when to calibrate the cameras.
    View full article
    100% helpful (1/1)
    ‎07-28-2021 02:05 PM
    Relates to:   IP Storage/PC HW - DIVAR IP 6000 R2 and DIVAR IP 7000 R2 Both DIVAR IP units running the BIOS from American Megatrends Inc. (A.M.I) There are   PRE   BOOT   or   POST   BOOT   beeps. Please see the following Acoustic Error Codes.
    View full article
    100% helpful (1/1)
    ‎11-19-2021 09:25 AM
    This article describes how to set LUNs on a target to Read Only via Configuration Manager.
    View full article
    100% helpful (3/3)
    ‎10-12-2021 10:13 AM
    BOSCH offers and confirms that since February 2017 the firmware version 3.180.05-1562 can be used with the LSI MegaRAID Controller. In case there are newer versions supported and recommended with BOSCH DIVAR IP this will be announced in cooperation with the Product Management. For DIVAR IP units (e.g. DIVAR IP 6000) BOSCH BT Security & Safety Systems offers an firmware update for the internal MegaRADI Controller. It could happen that in the Megaraid Software the user can see the following: potential non-optimal configuration due, PD commissioned as Emergency Spare error.
    View full article
    ‎01-17-2019 10:12 AM
     The Software "VIDOS" or "VIDSO-NVR" with the replay tool "Archive Player for VIDOS" are all rather outdated former software developments of BOSCH ST. We kindly request all our partners and customers in the need to get technical support on license transfers to get in contact with a local BOSCH team (e.g. Sales contact person). Level 2 Support / ASA organization can assist and help you to find a correct contact person as well, but a support ticket should and can no longer be created as license transfers are no longer offered for discontinued and outdated software. Status of Aug 3, 2018   In many countries, the VIDOS Software went end of live 2011. With this announcement, we inform about the discontinuation of the software maintenance and license transfers. Please be aware of the EOL status (End of life). EOL was rolled out globally in June 30, 2011 with some exceptions in North America. December 31, 2012 and later it was no longer possible to purchase the software. End of 2015 License management was restricted. Due to many other changes (Operating system limitations and not state of the art security support), it is anyhow no longer possible to use those software. BOSCH does offer for a long time other software generations and we offer migration support from commercial side to find software today that can meet the needs in projects. Since 2018-08-03, BOSCH Support can no longer offer license transfers for VIDOS and similar former Software packages. Following Type Number and SAP Number is included:   For more details you can check with the Technical Support for video products at BOSCH in your region.
    View full article
    100% helpful (1/1)
    ‎08-13-2021 01:03 PM
    In this article we cover the following basic questions: How to Factory Default a NetApp E-Series unit by using BOSCH tools and NetApp WEB GUI? How to download the NetApp Support Bundle of a reachable online NetApp Storage Array
    View full article
    ‎01-15-2019 02:21 PM
    Version 1.2.1 has been released for iOS only. It resolves an issue when trying to connect wirelessly to a FLEXIDOME IP 8000i camera. There was an issue where the operating system blocked the Wi-Fi access.
    View full article
    100% helpful (2/2)
    ‎08-11-2021 09:52 AM
    The entire BVMS installation package, available on the   downloadstore, contains the client as well as the server components. When a BVMS client needs to be deployed, all of this data (over 2.5GB) needs to be copied to the target workstation, which can be quite a challenge in some environments.
    View full article
    ‎11-19-2021 10:00 AM
    This is the old way as for Project Assistant versions < 1.3.
    View full article
    ‎10-14-2021 04:07 PM
    This article provides a background information about syslog, tips for 3 rd party Syslog server options and step by step instructions how to configure, activate and collect the syslog.
    View full article
    8 hours ago
    Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).
    View full article
    ‎08-11-2021 10:19 AM
    When using the BVMS 9.0 installer on a Windows 10 "October 2018 update" machine (Build 1809) the SNMP services cannot be installed. Microsoft has changed the way the SNMP services are installed in Windows 10 "October 2018 update".
    View full article
    ‎12-06-2018 03:48 PM
    For larger projects, where many cameras need to be commissioned, the question might come up on how to tackle it in the most efficient way using the Project Assistant. In the end, a Project Assistant file can comprise up to 500 cameras. Especially if multiple contributors perform the commissioning step in parallel, you need an appropriate approach. For visualization reasons, let's use a simple example. Let's imagine we have a project that comprises 500 new cameras in total. 250 cameras for building A and another 250 cameras for building B. Here are two options: Creating multiple (sub-) projects and merge them in Configuation Manager If you cannot use Dropbox for synchronisation via the cloud, you can simply create 2 projects - one for building A and one for building B. Both projects can be prepared ahead of time, e.g. in the office, and exported in order to share them. Sharing the exported as well as encrypted project files can be done via E-mail, thumb drive, any of the major cloud storage services, etc.*. Now let's assume that there is one contributor working on building A and one working on building B. After each contributor has commissioned his or her 250 cameras each, they can themselves export the project files. To re-combine or merge both sub-projects, we have introduced a Project Assistant project file import feature in our Bosch Configuration Manager 6.10. This feature allows you to conveniently import multiple project files at once and to easily integrate them into your existing system structure. Please, check out the corresponding "How to import project files into Configuration Manager 6.10" article in this community. * Restrictions due to project file size might apply depending on the sharing medium. The synchronization functionality is only available for Dropbox. Using the Dropbox Synchronization feature This feature let's you plan and preprare a project ahead of time, e.g. in the office, which can then be shared via Dropbox with multiple other contributors as needed. That means everyone that was "invited" to work on this project has access to the same project file, where there is only one "master" version residing in the cloud that is accessed and synchronized via Dropbox. Consequently, you can avoid managing multiple versions of the same project file. Therefore, depending on the internet connectivity of all contributor's devices, you can see the real-time progress of the project, no matter if you are in building A, building B or even in the office. All updates to the project are immediately synced via Dropbox among all contributors. If you want to know how to setup it up, please check out the following videos:   Of course, the Project Assistant project file import feature in our Bosch Configuration Manager 6.10 is also available for futher configuration and system integration for this option, as well.
    View full article
    ‎12-06-2018 09:40 AM
    With the introduction of the Configuration Manager 6.10, we will make the transition from one tool to the other smoother by offering an import feature, which allows you to import all cameras from a .bpassist project file without having to re-enter the individual credentials of each device. The feature allows you to: import one or multiple encrypted .bpassist project files at once automatic integration of device credentials check the software seal information to make sure configuration of each device has not been tampered with integrate the project file grouping into your existing structure create a backup of your system configuration after a successful import   Example: Go to the "Tools" menu and select "Import Project Assistant File..."    Select one or more .bpassist files that you want to import    After entering the project file passwords, the Configuration Manager can decypt the files and you will then be prompted with an overview of the project file content Choose where in your existing structure you want to integrate the new devices ("Import to group" section) Verify project file content Select, whether you want to create a backup after import Select, whether you want to keep the project file groups after import After successful import, you can find all newly added devices in your target directory  
    View full article
    ‎05-23-2019 07:45 AM
    Question  What's new in version 1.2? Answer Next to general stability improvements and bug fixes, version 1.2 of the Project Assistant introduces the following new features: Support of Flexidome IP 8000i Wi-Fi camera with regard to wireless commissioning .txt file import now supports tags to be somewhere in the column header, e.g. “IP address [ip]”, where for version 1.1 only the [ip] tag was allowed in the column header exclusively Software sealing support for cameras with firmware 6.60+ Extended report information Related News Project Assistant project file import functionality in Configuration Manager 6.10 Bosch portable camera installation tool is available and can be used in combination with the Project Assistant (check out the corresponding how-to video in this community)   PS: For detailed information, please refer to the release letter attached.
    View full article
    100% helpful (2/2)
    ‎02-12-2019 02:22 PM
    In BVC 1.5 and BVC 1.6 the Forensic Search option (IVA) is not visible in the GUI anymore.
    View full article
    ‎05-22-2018 04:57 PM
    Related Products DIVAR AN 3000 DIVAR AN 5000 How to configure Monitor B output for Divar AN 3000-5000 Solution see attachment.
    View full article
    ‎08-02-2021 10:52 AM
    The Divar AN 3000/5000 features the ability to ping an IP address, thus allowing the technician to verify that the workstation that is to connect to the Divar can be seen on the network. Please note   that this only checks the connection from the DIVAR to the Workstation. Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP echo reply. The program reports errors, packet loss, and a statistical summary of the results.
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist