Security: Video

A red LED will be displayed in front of the damaged HDD. On DIP-74xx with RAID5, with only one faulty HDD, there is no DATA LOSS.

This article explains how to enable the blurring feature on the DINION 7100i IR camera. Available with firmware version 9.10.0192 or later, blurring can be activated through the camera’s configuration settings.

This article answers whether the DINION IP Starlight 7000 HD camera (NBN-73023-BA) can be set to corridor mode for narrow spaces like hallways and explains why this model doesn't support a 90-degree rotation setting.

The following instruction describes how to create a RAID5 logical volume on the DIVAR IP all-in-one 7000 4th gen. This procedure will wipe the current logical volume and therefore cause DATA LOSS.

When the VSG IP address needs to be changed, the old recordings will not be available

The internal logs are directly located in the folder C:\ProgramData\Bosch\VMS\Log and then are named like "CameoSdkLog_Instance1.txt.0".  To activate the Cameo SDK logging, the "Init" button has to be pressed after setting the checkbox "Internal logging" and entering an instance name - then logging is activated with the given instance name (e.g. "Instance1").

This article provides you with the available options, services and licenses in Bosch Remote Portal for Bosch IP cameras.

This article gives an overview of CPPs that correspond to certain types of cameras, decoders and encoders.

With the release of the DIVAR IP all-in-one 7000 gen4 (DIP-74xx), a new tool is available for health monitoring and log gathering, it essentially replaces SuperMicro’s SuperDoctor5; the ASUS Inband Tool. This tool operates as a service on the DIP and provides a webpage with hardware health monitoring options, hardware status details, and hardware information, as well as an option to export logs and run reports.

This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. This method provides the steps for collecting the NetApp DSA E2800 support bundle.

   Find attached the French version of this article!   🕞 This procedure takes in average ~ 10 min to complete   This information may be requested by Central Technical Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. The method for collecting the NetApp DSA E2800 support bundle file from SANtricity Storage Manager App is provided below.   Step-by-step guide   Please make sure that you have the SANtricity Storage Manager App installed on your unit. 1. Open the SANtricity Storage Manager App   2. Right click on your DSA E2800 > select "Execute Script..." option    3. Add the following line in the Script Editor:  save storageArray supportData file="c:\supdat.7z" force=true;   4. Go to Tools and select "Verify Syntax"   5. "Syntax check complete" message should be displayed   6. Next, go to Tools and select "Execute Only"   7. To perform this operation, you have to login with your DSA E2800 credentials > click OK > "Working" message will be displayed Note: it may take a while for the next window to appear 8. Select "Add Security Exception" and next "Confirm Security Exception"   9. You will be prompted to enter the credentials again. Fill in the necessary details and click OK   10. The Script will start the execution and the bundle file will be exported.   11. The file will be downloaded in "C:\"     Nice to know:   How to download the support bundle file for DSA E2800 via WEB browser? How to download the support bundle file for DSA E-Series E2700?   You can also see the NetApp Knowledge Base:  How to collect an E-Series support bundle via SANtricity command line interface Note: You should have a NetApp account to access the NetApp KB article above.

Bosch Remote Portal release notes are a key resource for staying informed about the latest developments, maintaining security, ensuring compatibility, and optimizing the use of the portal. Subscribe on this article and stay up-to-date with the latest news!

This is how every VRM behaves when it is accessed in a web Browser. This is happening because there is no https certificate loaded on the VRM and you can't even create a self-signed certificate for HTTPS access like for cameras. You need to click on "Advanced" and then on the link bellow. So, this is the way it is intended to work.

For connecting the Bosch IntuiKey keyboard with a BVMS workstation, use the specified Bosch cable. For connecting the Bosch IntuiKey keyboard with a VIP XD decoder, you need a cable which connects a serial COM port of the keyboard with the serial interface of the decoder. 

This article explains if camera credentials are needed for the IVA Configuration plug-in.  

Are you searching for a specific Firmware/Software version and unsure of what to expect when contacting Central Technical Support? The below information might clarify things for you when you get in contact with Central Technical Support team: The Central Technical Support team will need to: Identify your company and product to open a ticket for your request. Verify if the requested FW/SW version is publicly available or not. If publicly available, they will provide you with the download link for the SW/FW version (e.g.  Download Store or Product Catalogue) If NOT publicly available then, the Central Technical Support team will internally check and depending on the SW/FW version an approval must be requested. The request can be approved or rejected by internal Bosch department. In both cases, you will be informed. Depending on the requested older/special FW/SW versions that are not available on our Download Store website, the following steps could be taken: Central Technical Support will provide you with the "Legacy SW/FW Request Form". You will be required to sign and fill in the "Legacy SW/FW Request Form" with all necessary details and return it to Central Technical Support. The Central Technical Support team will verify whether the form is filled in and signed with all the required details. All information provided on the form must be approved by internal Bosch department before the requested FW/SW version is provided. If the form is filled in as required and approved, then the Central Technical Support team will provide you the link from where the requested SW/FW version can be downloaded. Note: The download link has a limited availability, and this will be communicated to you in advance by the Central Technical Support team. To ensure that your Bosch IP video system is always operating at its best, explore the the Bosch IP Video Firmware Info Brief to find out the latest firmware updates. Please be aware that the Info brief hyperlink is subject to change. To access the latest version, please visit the Download Store, navigate to the Firmware tab, and select Cameras & Encoders. Remember that providing accurate and detailed information can significantly speed up the troubleshooting process and help Bosch Security Systems Central Technical Support team provide you with the best possible assistance.   More information about the Central Technical Support team and other Bosch Video policies, can be found here: Bosch VIDEO Security Systems request and Central Technical Support Team.

This policy explains step-by-step what you should know about the Divar IP process when contacting Central Technical Support team and what to expect from them.

Did you forget the password of your Bosch VIDEO Systems Security device? To find out the way of handling password reset requests by the Central Technical Support team, follow the below steps:   Contact Central Technical Support team via email (centralsupport.bt@bosch.com) or phone and provide your contact details Central Technical Support team must identify your company account in the database. If no company account was found in the database, then you will be asked if the product was bought directly from Bosch or through a distributor. In the meantime, a ticket will be opened for your request. If the product was bought through a distributor, you will have to contact your distributor. If the product was bought directly from Bosch, your contact details and the account will be verified internally by the sales team for authentication. the Central Technical Support team will not continue the process until receives the confirmation about your account authentication. It can take a while. if the authentication fails, then you have to contact your distributor. if the authentication is successful, the password reset process continues with the following steps: 4       The Central Technical Support team will request the following details: software/hardware product(s) the number of products, the installed firmware or software version serial number MAC address IP address 5       The Central Technical Support team will send you via email the prefilled Authorization Letter template  6      You have to fill in with all the information requested in the Authorization Letter, sign and stamp it and send it back to Central Technical Support.  7       If the data in the Authorization Letter is correct, then the execution of the Password reset can be made.  8      Depending on your product the password reset procedures will vary/differ. Please check the below links. Analog / Hybrid / Network DIVAR IP Cameras, HW & SW Decoders, Encoders IP Recorders Management Systems     9   Once the password reset is done, the ticket will be closed.  Nice to know: The response time for any password reset topic is 24h. If you request password reset for more than 4 cameras, this service could be chargeable. For e.g., if the request is for >=4 cameras/ DVRs, then you will receive the quote and the invoice. The same will happen for other combinations of SW and products, when password reset is requested for them.                 If this is a chargeable service, local sales will be involved and they will prepare and send a quote based on the local sales process ⚠️ Note If under certain circumstances it is found that a password reset request has been divided into different requests with a smaller quantity of products/SW, for the same site and in less than a month, then the password reset process will be declined and will not continue or will be invoiced.   More information about the Central Technical Support team and other Bosch Video policies, can be found here: Bosch VIDEO Security Systems request and Central Technical Support Team.

If you have a Bosch Security Systems product which needs repair or replacement, this is what you need to know about how the Central Technical Support team handles the RMA process.

This article explains whether you can connect a MIC IP starlight 7100i camera to 5G devices with SDI output. Unfortunately, the MIC IP starlight 7100i doesn’t support SDI output, and currently, no adapter exists to convert its output to an SDI format.