Security: Video

This article presents the comprehensive steps of DIVAR-IP all-in-one System Manager and Remote System Management installation and configuration

Bosch has been providing 2 types of VRM packages: a 32bit and a 64bit version. Since VRM 3.82 we are only offering the 64bit version.  

At the initial setup of DIP 7000 AIO R3, when the Software Center has to be installed,  you might get the “Certification Check Failed” error message.

Find out from this article which VRM version is compatible with your DIP and what BVMS version is supported.

Check this article and find out how can you fix the bad frozen image and no PTZ, bad images, uncontrollable web-interface, stuck images in Genetec live/recording for AUTODOME IP starlight 7000 HD camera (FW 7.10.0076) integrated in Genetec as VMS. Version 5.9.4

See what you can do when MIC 7000i with FW 7.72 shows blurred images. After restart, the quality of the image is good for a short time, but the issue reappear.

Have a look at this article and learn what you should check when your cameras do not record and when going to VSG and recording, it stands that 'ANR not configured' or 'No more blocks available'

BVMS Operator Client has live issues (black image, the app closes by itself, pixelation of images, same camera shown in multiple cameos although it was only selected once, hibernation/power saving, part of the tree view seen in the Image Panes area). Follow this article and find out how you can check the basics for BVMS Operator Client live issues

This article describes the considerations that need to be taken into account when designing a video surveillance system that is suitable for person identification. 

The USB driver has a different letter than E:\ and DIVAR IP Software Center seems to look only in this root, in fact it doesn't find the new software.

Check this article and find out what you can do if you are using one Divar network 2000 and you have a new Flexidome IP 5000i IR camera, but you cannot add it to the Divar because it is not displayed in “Detection” > “Device search” screen.

Username Administrator is not available from the drop-down list, and any generated backdoor password will not work & only one user (other than Administrator) is available in the drop-down list

If you are using the ATSL-script, use the following RCP-CGI command to switch ON-OFF the IR-LED of FLEXIDOME IP 3000i IR camera

Follow the steps from this article when an error message appears on your DIVAR IP 5000 AIO during license activation process

The sectors 1-4 are displaying only black screens and the message 'Display blanked' in Live view mode on the web page of the camera. Find out from this article how you can fix this!

This customer explains step by step what can be done when DIVAR IP 7000 server stopped recording suddenly and the Video Recording Manager service is not running.

This list contains information on what situations might happen if no Smart Notification reaches the mobile device and no event appears in the Site Monitor App's event list:

FW 11.50.2 must be used for Single Controllers and 11.60.2 for Dual Controllers

If one of DIVARs IP 5000 AIO is selected on a user profile, the Operator Client opens the site and works fine. One message is displayed when two or more DIVARs are added into the same Enterprise system.   If you already have a DIP 5000 AIO into your Enterprise system and you want to add additional units but you receive the following message, you can solve this by using the steps below: "Server of configuration database is already in the server list. Remove either the server that is twice in the list or make sure that the configuration database is not cloned between servers."

This article explains how to fix the behavior of MIC IP 7000i/9000i Bosch camera when is out of focus during a rapid zoom