Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (1/1)
    ‎01-24-2022 02:25 PM
    The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.
    View full article
    100% helpful (4/4)
    ‎08-23-2021 09:07 AM
    This article informs about improvements in firmware handling and new security mechanisms that help our customers to increase security related to firmware updates and IP camera protection.
    View full article
    ‎04-05-2021 04:30 PM
    If you are interested in retrieving the stream of an IP camera using multicast, please check out the options from this article.
    View full article
    100% helpful (1/1)
    ‎07-28-2022 11:14 AM
    Question:  What you should know when you request a password reset for the Bosch IP camera? If you forgot the service level password for you Bosch IP camera and you want to reset its password, the Central Support Team can help you. Before requesting a password reset for your IP camera, please note that you need to provide some important information to the Central Support Team to get help from them.
    View full article
    100% helpful (1/1)
    2 weeks ago
    The browser supported by Bosch cameras depends on the CPP that camera belongs to and on the Firmware version the camera has.. In web browsers that do not support MPEG-ActiveX, VCA configuration is only possible via Configuration Manager.
    View full article
    Wednesday
    The Project Assistant offers two ways of importing existing project data Importing a .bpassist file or importing from a tab-separated text file
    View full article
    ‎09-06-2021 02:19 PM
    Not all Cisco PoE+ switches are able to power up the UHO-PoE-10 or VSP-UHO-PoE-10 outdoor housing (F.01U.300.502, F.01U.332.052). Bosch has introduced the UHO-PoE-10 in 2014 following the IEEE802.3-2009 standards Cisco claims that the Bosch UHO-PoE-10 at startup for a short moment (around 1 micro second) exceeds maximum current peek allowed by the updated IEEE 802.3-2015 standard, allowing the PSE (Power Source Equipment) to withdraw the power as a protective measure. Due to analogue overcurrent protector components in the Cisco switch it can happen that tolerances may cause variety in behavior over different Cisco switches, even when the same model and setups are used. Currently this behavior is only known on some Cisco models. (reports were seen on C2960X, C3560CX and recently C9200.)  
    View full article
    ‎06-01-2022 04:03 PM
    The camera supports the SNMP V1 (Simple Network  Management Protocol) for managing and monitoring network  components, and can send SNMP messages (traps) to IP  addresses. It supports SNMP MIB II in the unified code. You may need the SNMP MIB file when you are trying to monitor the camera through a Bosch or 3rd party software. This article aims to describe how to find and enable the SNMP on a DINION 6000 HD camera. Article requirements: IP camera PC Same LAN connection between the camera and PC
    View full article
    100% helpful (1/1)
    ‎04-05-2021 05:02 PM
    If you are wondering where can be configured the field of view and focus of the FLEXIDOME IP starlight 8000i,  without  having to touch the camera or lens, this article will provide you the answer. 
    View full article
    ‎04-26-2021 04:30 PM
    Question What is a CPP and where you can find it for you Bosch IP camera?   Answer   To guarantee high quality imaging through the entire range of products, Bosch Security Systems uses a Common Product Platform (CPP). A CPP is a reference design that serves as a solid base for future cameras. Based on the same CPP, sub- or new products can be generated more easily by using a different sensor and/or a different housing. Each product cannot only benefit from the features provided by the platform but can also advance its functionality. Other advantages: easier integration with 3rd party security system components, such as VMS and recording solutions. allows installers and integrators to use the same interface that supports the entire Bosch product portfolio. new camera and software releases, regardless of the price segment, can be easily added to an existing security surveillance system. it helps you to find the right version of firmware you need for your camera   Where you can find the CPP of you Bosch IP camera?   1. Release notes: you can search for it directly on the product page > under Downloads section you will see the CPP version of your camera. In this example, the CPP for FLEXIDOME IP panoramic 5000 MP camera is CPP4:   2.  You can find the CPP of your camera on the web page by entering the IP address of it. Go to Configuration > Service > System Overview   CPP & Firmware: All firmware releases for the various Common Product Platforms (CPP) for Bosch IP cameras and video encoders can be found on the Bosch Security and Safety Systems page in Download Area. For detailed information of a specific product, the product catalogue is the recommended way to go. Those, who just need to update firmware and already know the platform which their product is based on, may directly go to the Download Area for a quicker and condensed overview   Other useful articles related to CPP & Firmware: Where you can find the intermediate firmware version when upgrading CPP4 cameras? What is the maximum firmware version supported by cameras depending on the BVMS version? TB VS: Bosch IP Video increased security with Firmware 6.51 / Firmware downgrade dependencies FAQ VS: How to upgrade from <6.10 to Firmware 6.50 and usage of the "combined firmware file 6.50"
    View full article
    ‎07-28-2022 11:53 AM
    Follow the instructions from this article and find out how you can activate a license on your Bosch camera.
    View full article
    100% helpful (1/1)
    ‎10-28-2022 01:22 PM
    Whenever a central NTP Server is available the recommendation is to synchronize all cameras against the NTP central server.
    View full article
    2 weeks ago
    Depending on the FW version of cameras and BVMS version you have installed, different possible situations can occur such as: the cameras are not working because the firmware is old, Configuration Client will display a message like: "unknown platform", Gaps in recordings or not recording at all and so on
    View full article
    100% helpful (1/1)
    ‎04-05-2021 11:39 AM
    Do you want to configure the 3rd party iSCSI storage with different LUNs for recording more cameras without Bosch VRM? This article explains you if this application is supported.
    View full article
    100% helpful (1/1)
    ‎04-05-2021 05:04 PM
    Question Often, the camera image is running fine, then begins to stutter when the objects are in moving scene or in a complex environment. Your view starts looking like a slideshow, things get visibly choppy and swaying objects start to move less fluidly. This behaviour can be controlled by changing the frames per second   (FPS) value or upgrading the Firmware   of your camera. ❓   But where can you find or change the frame rate & Firmware settings of Bosch cameras?   If you want to improve the image quality of your Bosch camera and you did not find the FPS option in the Web User Interface, please follow this article and you will find the answer. So, keep reading this article and find out where you can get multiple information including the   Firmware version of your camera, from a single comprehensive system overview page.
    View full article
    a week ago
    Find out from this article where you can find the installation code needed to license a Bosch camera
    View full article
    ‎04-05-2021 04:09 PM
    Accidents happen, but cloud backup services from Dropbox help make recovering your lost files easier. If you want to download the Bosch camera videos to your Dropbox account, please follow the steps below. Article requirements: Create a Dropbox account Go to the configuration menu of the Bosch IP camera, either by adding the “IP number/port” of the camera in the address bar/URL (ignore security warnings, and in the pop-up menu; fill in “service” as username and the camera’s password) or by using the “Configuration Manager” (on Windows PC) select the camera, right-click and select “configure verification for camera”. Ignore security warnings, and in the pop-up menu fill in “service” as username and the camera’s password). Check whether the most actual FW is installed on the camera. If not, make sure you do this first ( link download store for FW, Configuration Manager and video security client). Bosch Video Security app installed (IOS, Android and Windows)
    View full article
    ‎08-23-2021 12:09 PM
    The unit can receive the time signal from a time server using various time server protocols and then use it to set the internal clock. The device polls the time signal automatically once every minute. To check the NTP connection from the camera please follow the below steps:
    View full article
    ‎06-15-2022 01:55 PM
    This guide is meant to explain how to enable the appropriate debug commands for logging during random reboot situations, and which logging to collect for troubleshooting, as in general there are multiple triggers that can cause a device to reboot. The information gathered will help to analyze the root cause.  Please make sure that all of the logs collected cover the same time period.
    View full article
    ‎10-21-2022 03:00 PM
    Find out from this article what might be the cause that could lead to this message being displayed: “error 18: wrong or no signature”
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist