Security: Video

This article describes how a Tattile camera can be connected to BVMS. We recommend keeping the Tattile camera documentation and BVMS configuration manual at hand to fine tune the system configuration to the specific needs of your project

In order to enhance user experience and security for all connected recording and management systems, Bosch has upgraded the cloud and service infrastructure. As a result, existing connections between DIVAR IP all-in-one systems and Remote Portal were terminated on February 15th 2024 and will need to be restored.

In order to quickly offer a technical solution or to provide a professional advice for the next analysis steps, the technical support specialists need to get some general and basic information. Ticket content should always be in English and provided in a well summarized and structured way in order to be able to provide a quick and appropriate feedback. Not following the guideline will impact the processing time of the ticket. Related Products: BVMS Operator Client Overview: This article describes the initial steps one can take for troubleshooting BVMS display issues (during live view or playback). It also summarizes what initial information and logs are needed for support in order to start the issue investigation.   General Information   SMA validity How to retrieve the Hardware ID for BVMS and check the Software Maintenance Agreement (SMA) status? BVMS stand alone or appliance Detailed problem description Check and eventually update the version of your Graphic Card driver. During BVMS system tests there were documented cases of display issues related with out of date Graphic card divers. ❗ It is important that the Graphic Card driver of the client is up to date. Find the supported version of the Graphic Card driver in the corresponding to your BVMS version Release Notes (https://downloadstore.boschsecurity.com), in the section Hardware drivers.   Symptom specific Information   Problem Description   Is the issue dependent on camera type/ FW? Are all the devices in the system affected? Is the issue existent for all BVMS Operator Clients in the system? Is the issue existent for hardware decoders, for camera Web Interface or other display Clients? Is the recording, the playback or are both affected?   Logging Information   BVMS ConfigCollector logs keeping the following conditions: From the machine that shows the issue VSDK logging – please follow the steps from the article: How to collect Video SDK log files  VRM logs (in case VRM runs on the same machine like the BVMS MS, then BVMS ConfigCollector logs from the server) for VRM version 3.82 and onwards use VRM Monitor. The following articles will help you out:   How to access VRM monitor from BVMS Configuration Client? How to collect VRM logs with VRM Monitor (v3.82/ v3.83)? Screenshot of the Dashboard of the VRM for VRM version till 3.81 - contact support to receive BVIP Log collector tool and use it to collect VRM logs Movie showing the display artefacts can be helpful

This article provides a step by step description of how to create certificates and configure their distribution in the large systems. 

This article describes the basic concept of virtualization and it also puts the technology into the perspective of the safety and security industry.

In this article you will find attached an example of scriplet that turns BVMS Operator Clien in full screen mode and creates and displays a simple favorites of one camera

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

This behavior occurs when you have requested the SMA extension and you didn't upload the Activation file in the BVMS Configuration Client.

The MBV-MBase is the license that allows you to extend the SMA in Remote Portal. You receive this license when you place an order to Order Desk for SMA extension and it must be activated in the Remote Portal and on the server like any other license.

This article will provide a basic explanation and simple examples of the interfacing (scripting, calling functions by external applications) functionality in Bosch Video Management System.

Logs are definitely important. We would even say they are the most important thing for a system to function properly. At some point, the Central Support Team may ask you to provide them with the BVMS Configuration Collection. This article explains you how and where you can get the BVMS Configuration Collection of your system.

This article contains the RCP+ commands (VJD 7513) to change the layout and see what camera you want to be displayed

In contrast to the moving objects detected in general by IVA 7.10, Camera Trainer allows detection of both moving and non-moving objects, separates, and immediately classifies them. Learn more about Camera Training from this article!

If you have for example a DIVAR 7000 AIO as central BVMS server and also, on the same network, you have a DIVAR Network Video Recorder (NVR) to which cameras are connected to and recording, the recording is typically handled by the NVR itself. Therefore, in this case the cameras added on the NVR will continue recording only there because the NVR manages the recording and storage of video footage from them.

MVS gets error message “Videoprovider not available” when trying to log on. Also, the BVMS Configuration Client shows the X mark on the MVS. What to do?

If one of DIVARs IP 5000 AIO is selected on a user profile, the Operator Client opens the site and works fine. One message is displayed when two or more DIVARs are added into the same Enterprise system.   If you already have a DIP 5000 AIO into your Enterprise system and you want to add additional units but you receive the following message, you can solve this by using the steps below: "Server of configuration database is already in the server list. Remove either the server that is twice in the list or make sure that the configuration database is not cloned between servers."

If the ‘decoder offline’ message occurs during the FW upgrade from 54.7 to 54.8,  try to use another version of Configuration Manager, or remove the password temporarily.

This article provides an answer regarding what to do in case if a  colleague from the same company claimed a license with a wrong Remote Portal account.

This article explains step-by-step how to add and keep the purchased licenses in my Remote Portal account. Upon purchasing licensing, an email from Bosch provides the needed codes.