Security: Video

After clicking the Forensic Search button in Bosch Video Management System (BVMS) - Operator Client, "Video image is not available" message is displayed. What could be the reason?

This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.

In this article you will find all the steps of the process to recover the DIVAR IP AIO 4000 or 6000 to factory defaults.

The Intelligent Insights widgets can be visualized in BVMS Operator Client. In this article we are going to show you how to add a widget to Bosch Video Management System (BVMS).

In some cases the IVA tasks can get lost after firmware update, but you can avoid this by copying the IVA configuration. There are 2 ways. In both ways it's not guaranteed that all task shall work afterwards since new firmware version can contain a new IVA version with new features.

BVMS - Automatic login of Operator Client: The BVMS Operator Client can be automatically logged in by using parameterized startup.

The pop-up dialog window message: "Setup has detected a pending restart.  Please reboot the system and rerun the installation"  appears when attempting to run the valid BVMS windows installer package.

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

This article explains what you shoud do when the display output suddenly shows “System Initializing 91” message on screen, while you are turning on your DIVAR IP 7000 R2

Find out from this article what can be done when your HP Z2 with Windows 10 LTSC 2021 and Nvidia driver has black screen (workstation does not boot up). The secure boot does not recognize this as a valid UEFI combination of OS & video board and blocks the booting.

In order to increase system security in BVMS, it is recommended to set the Global CHAP password. This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.

This article explains what can you do when ‘Authentication failed’ message occurs when accessing VSG in BVMS v11.0

Once installed and licensed, an application can also be uninstalled from the camera. In this case, the license is being returned to the license pool. It can then be installed on another device. Please note: no return option is possible for the *complete offline use case.

This account has been locked because of too many failed login attempts. Try again in 39 seconds.

Follow the steps from this article if you want to configure your camera to detect motion and then send the event to the server, to start recording. This guide helps you set this option only for nights and weekends. It is important that you find the best possible motion detection settings for the camera in order to avoid unnecessary recordings or notifications.

This article explains step by step how to play exported recording files from VRM eXporter Wizard in BVMS Export Player.

This article contains the steps to focusing a Bosch Box camera: set the Back Focus to the Center position and focus on a specific area

This article explains briefly the basics of SNMP. Declares the basic terms of the protocol. It also explains what part of the protocol is supported by Bosch cameras.