The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS.
This article contains possible causes and solutions regarding the recording error (stream 1) on the Remote Portal when camera records on its SD card on alarms only.
All Bosch IP cameras that are equipped with a Micro SD can record at the edge. While video recorded via Bosch’s proprietary iSCSI format is none readable, many sites require any type of recorded video to be encrypted.
Have a look at this article and learn what you should check when your cameras do not record and when going to VSG and recording, it stands that 'ANR not configured' or 'No more blocks available'
The Dashboard has a Maximum temperature that exceeds 80 Degrees C and the camera will display "Status 8" when the internal temperature is above 80 Deg C.
This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager