Learn from this article how to collect RAID Controller Event log, Diagnostics Logs or Server Report of DIP 6000 AIO via LSA for more in-depth troubleshooting, which might be required by Central Technical Support Team.
“Error: Discontinuity in network stream!” appears randomly on the monitor/s connected to the VIDEOJET Decoder 7000 (7513). What could be the likely cause of this?
This article explains how to enable or disable audio recording for specific camera in BVMS, on action of BVMS Operator Client user.
Follow the step-by-step guide from this article.
Select the resolution of the JPEG images. You can choose between various <formats>: – 720P: 1280×720 pixels (only available for HD cameras). – 1080P: 1920×1080 pixels (only available for HD cameras).
This policy presents what you should know about the In Warranty and Out of Warranty statuses of an Divar IP unit.
Note that, to find out if your unit is under warranty or not, the serial number of the unit is mandatory.
Bosch will undertake a cybersecurity best practice by disabling certain ports on the camera by default. This best practice is being undertaken to reduce potential attack surfaces and limit the exposure of sensitive services, as mentioned in our Data Security Guidebook since years.
New check in BVMS Configuration Client has been implemented, which blocks the disabling of the "Secure connection" if camera port 1756 is disabled. This should prevent the camera from getting "unreachable" by miss-configuration of the administrator.
The MG Camera Name and Number Setting (BVMS Configuration Client, under MG Camera Settings) was not designed for BVMS Operator Client cameo, but in fact for the CPP-Enc type of decoder like VJD-3000.
During the authentication process with Bosch cameras to a RADIUS server, the event “5400 Authentication failed” occurs. Find out from this article what you can do in this case.
Welcome to the 3.5 release of Video Security for Windows, Android and iOS. There are new features in this release, some of the highlights are explained within this article.
Please configure the same time zone on the PC, download the Remote Portal activation file again and then you will be able to load it into Config Client and license the system.
Maintaining the highest level of data security requires continuous improvements in all the system components - including software and device firmware. Recent changes in the camera firmware are focused on improving the security level overall.
The Bosch camera can make up to two (2) recorded tours. A recorded tour saves all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds, and other lens setting changes.
You should only subscribe directly to this article (Option 1) or to the software_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Software version is released and added to the lists within this article.
Glutton (German: Vielfraß) defines and prevents a camera or multi-channel encoder from mounting and consuming a large number of blocks in a very short time.
