Security: Video

This article provides you the way you can set the VIDEOJET decoder 8000/ 7000 (VJD-8000/ VJD-7513) to factory default. Article requirements: VIDEOJET decoder 8000/ 7000 Keyboard monitor

Does the video stream (from camera to client) remain only on the LAN? Or, does the video stream need to first process 'through' the cloud?

This article describes how you can add and grant a Technician user permission on a specific group or camera in Bosch Remote Portal. Per default a Technician user can access all unrestricted groups and cameras. The Technician can further access all restricted groups and cameras to which he is added to.

When it comes to maintaining your system uptime, you absolutely have to know when there's a problem, no matter where you are or the time of the day. Therefore, this article helps you learn how to enable Remote Alerts, if something happens on the site and you are not on it.

Intelligent Insights support controlling Bosch IP cameras by Common Gateway Interface (CGI) commands over HTTP or HTTPS when a threshold of the area fill level, area fill level traffic light or occupancy use case is reached. Follow the step-by-step guide below and find how you can to setup the threshold actions in Intelligent Insights.

Follow the steps from this article and find out how you can remotely view and collect the system's event log through IPMI (Intelligent Platform Management Interface).

This article explains how to add new ONVIF cameras to a system that runs in full Bosch Video Management System (BVMS) via the Configuration Client. Depending on the license type you have installed in the Bosch Video Management System (BVMS), you can add a certain number and different types of cameras/ encoders.  BVMS supports 3rd party cameras as well, but they need to be compliant to ONVIF Profile S.

This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client.

Operator Client helps you display the original full image circle of a panoramic camera, its image dewarped or you can select a point of interest of the image.

VSG is specifically designed to provide integration for 3rd party ONVIF, JPEG, RTSP, and legacy H.263 Bosch devices.

The purpose of this article is to assist you with the creation of mirrored drive sets in a DIVAR IP all-in-one 5000 Recording Appliance.This procedure should be performed on new appliances that have not yet been deployed.

MegaRAID Storage Manager software automatically rebuilds the RAID 5 on a DIVAR IP unit without data loss. The rebuild is a fully automatic process, so it is not necessary to issue a Rebuild command. You can also monitor the progress of drive rebuilds. Once the chassis was replaced and the drives were mounted in drive carriers, follow this step-by-step guide in order to rebuild RAID 5 on a DIVAR IP.

Check if your system is performing correctly! The VRM Monitor is one of the best options to check if the system is recording correctly, providing a quick overview as well as detailed information about all the cameras and storage added to VRM. In this article you are going to see how to access VRM Monitor from Bosch Video Management System (BVMS) Configuration Client. Furthermore, you will find here some useful information about each section on the Dashboard page.

Follow the steps from this article if you want to configure your camera to detect motion and then send the event to the server, to start recording. This guide helps you set this option only for nights and weekends. It is important that you find the best possible motion detection settings for the camera in order to avoid unnecessary recordings or notifications.

The latest suitable Image for your DIVAR IP R2 Family Device can be obtained from Bosch Central Support Team. Please provide the SN (serial number) from the DIVAR IP 6000/7000 R2 when contacting Bosch Central Support Team.

This article describes step-by-step how you can configure the Remote Portal in order to access the Bosch camera from your tablet or mobile phone via Video Security App.

If you are trying to connect your device to the Remote Portal and it says that server is unreachable, please check the firewall blocks and whether certain ports are not blocked.

This article explains how to license a system that runs in full Bosch Video Management System (BVMS) mode with help of Security Systems Software License Manager tool (SLMS).

This article provides the step-by-step procedure on how to configure “BVMS” presets and save views.

This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. This method provides the steps for collecting the NetApp DSA E2800 support bundle.