Security: Video

The minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time, the more storage space is required. In this article we are going to show you how to add DIVAR IP 5000 EZ in My devices (Configuration Manager) and configure max & min retention time.

The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.

This articles gives a short introduction to scripting alarm and counter tasks with Intelligent and Essential Video Analytics in FW 7.60. It also provides a broad selection of example scripts for explanation as well as including real world application examples.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.

Find out here what could be the cause of the following message displayed on DIVAR IP 7000 R2: "The instruction at 0x6566f31c referenced memory at 0x00000008. The memory could not be read."

This article presents causes and solution regarding NTCIP control of Auto focus, Auto iris and wiper functions.

This article provides solutions regarding how to resolve SD Card Recording Issues with the MIC-7100i IP starlight and Inteox Cameras

Alarm functions include local inputs and relay outputs, plus motion detection in user-defined areas. If an alarm is detected, the DIVAR can: send an e-mail notification and/or FTP push, sound a buzzer and/or display a warning, activate local alarm output

Whenever a central NTP Server is available the recommendation is to synchronize all cameras against the NTP central server.

The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS.

This article contains possible causes and solutions regarding  the recording error (stream 1) on the Remote Portal when camera records on its SD card on alarms only.

This article explains step by step how to load BIOS Optimized defaults on my DIVAR IP 5000 AIO unit.

This article explains how is the storage capacity calculated for DSA E-Series E2800 12-bay (RAID 6).

This article explains what does the color of the led in the front view of the DIVAR IP AIO 5000 indicate.

This article explain what is the difference between ‘Operator Logon- off’ & ‘Operator Client Logon- off’ events in BVMS.

This article explain what is the meaning of each button on the KBD Universal XF.

Find out from this article what might be the cause that could lead to this message being displayed: “error 18: wrong or no signature”

Here you will find the answer and recommendations of our experts related to the NVR integration in BVMS Viewer via DNS

All Bosch IP cameras that are equipped with a Micro SD can record at the edge. While video recorded via Bosch’s proprietary iSCSI format is none readable, many sites require any type of recorded video to be encrypted.